![](https://cubo.com.tr/wp-content/uploads/2024/01/AH8-CUBOWOOD-PARKE-VERNIGI-CAM-CILA.png)
It is an alkyd binder, solvent based, one component, transparent, UV resistant, glossy top coat parquet varnish.
Surface Preparation and Application
For best results, it is applied on clean and dry parquet surfaces that have been recently laid and have lost moisture. If there are films such as parquet varnish or lacquer applied on the surfaces before, they should be cleaned with scraper. After the surface is saturated with wood preservative, 2-3 coats are applied on the prepared surface. It is ready for use and can be applied with brush and roller. In pistol application, it is thinned with approximately 5% synthetic thinner. In order to ensure good penetration of the first coat of varnish to the parquet surface, thinning between 5-10% is required and at least 6 hours should be waited between coats. The application environment and surface temperature should be between +5 ºC - +30 ºC.
Ready to Use
15 – 18 m²
Two coat
0,75 L ile 4 m²
2,5 L ile 20 m²
12 L ile 96 m²
12 Hours
Roller, Brush
Other products in the category
-
CUBOWOOD VARNISHED GLOSSY WOOD PROTECTOR
-
CUBOWOOD PARQUET VARNISH (GLASS POLISH)
-
CUBOWOOD TEAK OIL
-
CUBOWOOD YACHT VARNISH
-
CUBOWOOD DECORATIVE MATT WOOD PROTECTOR
-
CUBOWOOD WATER-BASED MATT VARNISH
-
CUBOWOOD WATER BASED GLOSS VARNISH
-
CUBOWOOD WATER-BASED DECORATIVE MATT WOOD PROTECTOR