Skip to main content

CUBOWOOD PARQUET VARNISH (GLASS POLISH)

Alkyd binder, solvent based, one component, UV resistant, glossy, colorless, transparent top coat parquet varnish.

Bright
Solvent Based
UV Resistant - Scratch Resistant - Non-yellowing
750 ml – 2.5 L – 12 L

Surface Preparation and Application

For best results, it is applied on clean and dry parquet surfaces that have been recently laid and have lost moisture. If there are films such as parquet varnish or lacquer applied on the surfaces before, they should be cleaned with scraper. After the surface is saturated with wood preservative, 2-3 coats are applied on the prepared surface. It is ready for use and can be applied with brush and roller. In pistol application, it is thinned with approximately 5% synthetic thinner. In order to ensure good penetration of the first coat of varnish to the parquet surface, thinning between 5-10% is required and at least 6 hours should be waited between coats. The application environment and surface temperature should be between +5 ºC - +30 ºC.

Thinning Rate
Ready to Use
Consumption (in 1 coat)
15 – 18 m²
Paintable Area m²
750 ml ile 5 m²
2,5 L ile 16,5 m²
12 L ile 80 m²
Number of Application Coats
İki-Üç Kat
Drying Time
12 Hours
Recommended Application Apparatus
Roller, Brush
TDS
You can send an e-mail to info@cubo.com.tr for your MSDS request.
Color Chart
Transparent

Other products in the category

  • CUBOWOOD WATER-BASED VARNISH GLOSSY WOOD PROTECTOR

  • CUBOWOOD WATER-BASED DECORATIVE MATT WOOD PROTECTOR

  • CUBOWOOD VARNISHED GLOSSY WOOD PROTECTOR

  • CUBOWOOD DECORATIVE MATT WOOD PROTECTOR