Surface Preparation and Application

For best results, it is applied on clean and dry parquet surfaces that have been recently laid and have lost moisture. If there are films such as parquet varnish or lacquer applied on the surfaces before, they should be cleaned with scraper. After the surface is saturated with wood preservative, 2-3 coats are applied on the prepared surface. It is ready for use and can be applied with brush and roller. In pistol application, it is thinned with approximately 5% synthetic thinner. In order to ensure good penetration of the first coat of varnish to the parquet surface, thinning between 5-10% is required and at least 6 hours should be waited between coats. The application environment and surface temperature should be between +5 ºC - +30 ºC.